High efficiency pleated cartridges

Polypropylene, polyester, and glass fiber

MH SERIES
High Efficiency Pleated Filter Cartridges

With the most complete line of pleated filter cartridges we offer the most economical high efficiency pleated elements available. For your most critical throughput, the MH Series is the best solution to your filtration problems. The cartridge is made of pleated Polypropylene or Polyester media and has verified efficiencies of 99.98% at the rated micron. With more then 5_ square feet of media this cartridge will last longer and has a higher dirt holding capacity then any other cartridge available. With standard lengths to fit most housings, these cartridges are the perfect choice when economy and efficiency are critical.

Features

  • Micron ratings from 0.2 to 50 microns
  • Micron removal efficiency ratings at 99.98%
  • Meets requirements of the FDA for food and beverage applications
  • More surface area, more pleats, and more media offer higher dirt holding capacities
  • Polypropylene, Polyester or Glass fiber construction offers a wide range of chemical compatibility
  • Fixed pore construction allows for higher dirt holding capacity without unloading as the differential pressure increases

Filter Applications

  • RO Prefilters
  • Food & Beverage
  • Potable Water
  • Pharmaceuticals
  • Electronics
  • Waste Water
  • Cosmetics
  • Ultra Pure water
  • Photographic & Chemical solutions

Filter Specifications

Microns Ratings
0.2,0.45,1.0, 2.0, 5.0, 10.0, 25.0, 50.0

Nominal Lengths
5", 9 3/4" 10", 20", 30", 40"

Materials of Construction
Filter Media: Polypropylene Polyester Glass Fiber
Inner Core: Polypropylene Polyester Polypropylene
Cage: Polypropylene None Polypropylene

Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton,

Teflon Encapsulated Silicone
Please consult with a Shelco Technician for proper compatibility

Ordering Guide

MHP
0.2
10
S1
E
PRODUCT CODE
MICRON
LENGTH
END CAP CONFIGURATION
GASKET/O-RING
MHP-Polypropylene 0.2 5 S1=DOE w/ Flat Gaskets B=Buna-N
MHE-Polyester 0.45 975 S2=DOE w/ Flat Gaskets & Extended Core E=Ethylene Propylene
MHG-Glass Fiber 1.0 10 S3=222 w/ Fin End S=Silicone
  2.0 20 S4=222 w/ Flat End V=Viton
  5.0 30 S5=226 w/ Fin End T=Teflon Encapsulated Silicone
  10.0 40 S6=226 w/ Flat End  
  25.0      
  50.0      
Part Number Example:MHP-0.2-10-S2E; Polyester available in 2.5, & 25 Micron Ratings Only; Glass Fiber available in 0.3, 0.5, 1.0, & 3.0 Micron Ratings Only

FDA Compliance

MicroSentry™ High Efficiency cartridges are manufactured of pure polypropylene materials with no additives or other manufacturing agents. The manufacturer certifies that all materials used in the production of these cartridges meet the requirements of FDA Title 21 of The Code of Federal Regulations 174.5 and 177.1520.

FIlter Housings

Filter Supply handles a full line of filter housings. From our rugged single element housings to our heavy-duty multi-rounds and bag housings, we have the right filter for your requirement.
Single Cartridge Housings Multi Cartridge Housings High Flow Multi Cartridge Housings Bag Filters Jumbo Cartridge Housings

      

Email9c.gif (20296 bytes)

E-mail us for more information
l Tele: 1-866 339-6607 (toll free)
l Fax:  1-866 339-5284 (toll free)

Go to product listing

Go to home page